Thank you for using the English version of the JTL-Guide!
We are currently still building up the English documentation; not all sections have been translated yet. Please note that there may still be German screenshots or links to German pages even on pages that have already been translated. This guide mostly addresses English speaking users in Germany.
We are currently still building up the English documentation; not all sections have been translated yet. Please note that there may still be German screenshots or links to German pages even on pages that have already been translated. This guide mostly addresses English speaking users in Germany.
Connecting the SuperLead 5130 BLE handheld scanner
Your task/initial situation
You would like to use the SuperLead 5130 BLE handheld scanner during the checkout process.
The SuperLead 5130 BLE bar code scanner can be connected either via USB or Bluetooth. The scanner is thus suitable for both stationary and mobile use.
Connection via Bluetooth
- Turn on the SuperLead scanner by holding down the Scan button for 3 seconds.
- Scan the following bar code to put the scanner in Bluetooth mode.
- Open the status bar of your tablet by dragging your finger from top to bottom. Press and hold the Bluetooth button. You will then be taken to your device’s Bluetooth menu. Enable Bluetooth, if necessary. Under Available devices, you can view all active Bluetooth devices within range of the tablet.
- Select the scanner from the list by tapping on its device name. The scanner’s device name starts with “SL” followed by 12 digits. Once connected, the scanner will appear under Paired devices.
- In order to have later entries by the scanner accepted automatically, you must specify an “Enter” command as a suffix for each entry. To do this, scan the following bar code.
Detailed configuration instructions (from SuperLead)
Please find a detailed English user guide for the SuperLead handheld scanner under this link: